Shop New Propellers
Authorized Mercury, ACME, OJ, Volvo Powertech, Michigan Wheel and Solas Dealer
Once again Quicksilver has re-written the rules of propeller design and engineering. Who says you have to compromise top-end speed to get the acceleration and holding of a four blade propeller! With the Quicksilver Nemesis you can finally have both!
The Nemesis features the most aggressive geometry available in an aluminum propeller. It has more cup for best-in-class acceleration and holding, and tenacious grip in turns. Its high-rake reduced diameter design helps maintain top-end speed.
Nemesis Pontoon - the best pontoon prop in the Quicksilver line up, featuring the extra holding and lift to wake up the performance of your pontoon. Fitment for 40hp to 60hp large gearcase outboard engines or 75hp to 125hp standard gearcase outboard engines.
- 4 Blade Aluminum
- Right Hand Rotation
- 19" Pitch
- 12.5" Diameter
- Nemesis for boats powered by 25 HP to 125 HP outboards
- Hub Kit not included, may be purchased separately.
-
HONDA OUTBOARDS: 60 BFP, 75-130 HP - HONDA
- 15 Tooth Spline
- 60 BFP 1995 & Newer (Large Gearcase)
- 75 HP 1995 & Newer
- 90 HP 1995 $ Newer
- 115 HP 1998 & Newer
- 130 HP 1998 & Newer
- Hub Kit: Use Flo-Torq II attaching hardware kit #835277Q1 for 75-90 HP thru 1998 or #835279Q2 for 75-90 HP 1999 and newer, 115-130 HP all years. Purchased separately.
MERCURY/MARINER OUTBOARDS: 40-60 HP BIGFOOT, 70-140 HP STANDARD GEARCASE
- 15 Tooth Spline
- 650 Model (4 Cul.) 1961-70, 650 Model (2 Cyl.) thru 1971
- 900 to 1500 Models thru 1977, 60 HP SeaPro/Marathon All Years
- 70 HP 1987-89, 75 HP 2 & 4-Strokes 1984 & Newer
- 75 HP SeaPro/Marathon All Years, 80 HP Mariner 1977
- 80 HP 1978-89, 90 HP 2 & 4-Strokes 1978 & Newer
- 100 HP 1988-99, 115 HP 2 & 4-Strokes 1978 & Newer
- 125 HP 1994 & Newer, 140 HP 1978-81
- 40 HP-60 HP BigFoot All Years
- Hub Kit: With Stainless Steel props use the Flo-Torq III hub kit #835257A9
- Hub Kit: For 2-Stroke carb applications use Flo-Torq II attaching hardware #835257Q1. For 4-Stroke and Opti-Max applications use Flo-Torq III attaching hardware kit #835257Q9 to redue rattle. Purchased Separately.
YAMAHA OUTBOARDS: T50-130 HP - YAMAHA
- 15 Tooth Spline
- T50 HP 4-Stroke 1996 & Newer
- 60 HP 1992 & Newer
- T60 HP 4-Stroke 2003 & Newer
- 70 HP 1984 & Newer
- 75 HP 1994-2000
- F75 4-Stroke 2003 & Newer
- 80 HP 1977, 2000 and Newer
- F80 HP 4-Stroke 1999 & Newer
- 85 HP 1991-97
- 90 HP 1984 & Newer
- F90 HP 4-Stroke 2003 & Newer
- F100 HP 4-Stroke 2000 & Newer
- 115 HP 1984 & Newer
- F115 HP 4-Stroke 2000 and Newer
- 130 HP 1984 & Newer
- Hub Kit: Use Flo-Torq II attaching hardware kit #835272Q1 on 50 to 100 HP applications and kit #835271Q2 on 115 & 130 HP units. Purchased Separately.
SUZUKI OUTBOARDS: 70-140 HP (4-STROKE) - SUZUKI
- 15 Tooth Spline
- DF 70-100 HP 2009 & Newer
- DF 115-140 HP 2002 & Newer
- Hub Kit: For 90-115 HP 2001-2008 use Flo-Torq II attaching hardware kit - #835283Q1
- Hub Kit: For 100-115 HP 2009 & Newer use Flo-Torq II attaching hardware kit - #835283Q2
- Hub Kit: For 140 HP use Flo-Torq attaching hardware kit - #835283Q2
- Hub Kit: For 70-90 HP 2009 & Newer use Flo-Torq II attaching hardware kit - #835283Q03
TOHATSU/NISSAN OUTBOARDS: 70-140 HP - TOHATSU/NISSAN
- 70C HP 1996 & Newer
- 90 HP 1987 & Newer
- 115 HP 1992 & Newer
- 120 HP 1988 & Newer
- 140 HP 1988 & Newer
- Hub Kit: Flo-Torq Reflex Propeller. Replace existing forward and aft washer with Quicksilver kit #8M0053074. Purchase Separately.