Mercury Bravo I LT Pro Finished 15 1/4 X 27 RH 8M0121603
Mercury Bravo I LT Pro Finished 15 1/4 X 27 RH 8M0121603
Mercury Bravo I LT Pro Finished 15 1/4 X 27 RH 48-8M0121603
When it comes to propellers, “performance” is often measured by top speed alone. In reality, great all-around performance also requires outstanding hole shot, on-plane efficiency and fuel economy under a load. The Pro Finish Bravo I® LT outboard propeller covers all the performance bases and significantly optimizes ride quality. The flared exhaust tube lifts the stern. This brings the bow down for a more level ride. The result is improved handling and a dryer, more comfortable boating experience. Counter-rotation models expand the Bravo I® LT application from right-hand rotation, single engine outboard bay boats and multi-species hulls to multi-engine outboard center consoles.
• Handcrafted by Mercury Racing propeller artisans
• High luster Pro Finish for enhanced durability and corrosion resistance
• Patented Mercury® Performance Vent System® (PVS®) enables operators to dial in their propeller for peak planing performance
A majority of Mercury Verado® and Mercury Pro FourStroke applications will use the Bravo I® LT with all four vent holes plugged with solid PVS fittings. OptiMax 2-stroke applications require all four vent holes to be open. Upgrades from the Bravo I® FS to the Bravo I® LT require no change in pitch size when matching engine rpm.
- Hub kit sold separately, see the fitment information below to select the correct hub kit for your application.
- Right hand rotation propeller (clockwise rotation)
- Enabled with 3-hole Performance Vent System (PVS) to allow optimal hole-shot customization
- Equipped with solid PVS plugs installed
- 10%+ gains in fuel economy at cruising speeds, no performance compromise!
- Providing additional bow lift provides a smoother ride
- Availability: We try to keep several of the Mercury Racing Bravo I LT propellers on hand and readily available. However, these propellers have a longer lead time from Mercury Racing, thus they take longer to re-stock in the event that we sell out. We always advise that you contact us prior to purchasing to confirm availability.The Mercury Racing Pro Finish Bravo I LT Propeller is designed specifically for higher horsepower, single engine outboard powered bay boats and multi-species hulls under heavy loads.The hand-crafted, stainless steel Bravo I LT props are designed to improve planing and trim response throughout the engine operating rpm range. The result? An increase in top-end speed by 1 to 1.5 mph!The Bravo I LT features the Mercury® patented Performance Vent System® (PVS). PVS enables operators to dial-in their propeller for peak planing performance. The PVS® system works in concert with the LT's robust blades that are hand blended and balanced by our propeller lab artisans.A majority of Mercury Verado® and Mercury Pro FourStroke applications will use the Bravo I LT with all four vent holes plugged with solid PVS fittings. OptiMax 2-stroke applications require all four vent holes to be open. Upgrades from the Bravo I FS to the Bravo I LT require no change in pitch size when matching engine rpm.
Mercury 135-400HP Outboards
- 135-400HP Outboards, 1978-Newer
- Use Hub Kit #835257K6 for all 2-Stroke outboards with 1.0" prop shaft
- Use Hub Kit #8M0150151 for 135-225HP 4-Stroke outboards with 1.0" prop shaft
- Use Hub Kit #8M0101602 for 225+HP 4-Stroke outboards with 1.0" prop shaft
- Use Hub Kit #8M0101601 for all 1.25" prop shaft applications (V8 Fourstroke & 350-450 Verado)
Non-Mercury Outboards (4.75" Gearcase)Mercury MerCruiser Alpha & Bravo One
- For all engines with an Alpha or Bravo One drive
- Use Hub Kit #835257K6 for all applications less that 300HP
- Use Hub kit #835258K2 for all application over 300HP with 1.0" prop shaft
- Use Hub Kit #840389K06 for all 1.25" prop shaft applications
- Evinrude/Johnson/OMC (1991 and newer) - Use Hub Kit #8M0119081
- Evinrude/Johnson/OMC (1990 and older) - Use Hub Kit #8M0119082
- Evinrude E-TEC G2 (2015 and newer) - Use Hub Kit #8M0107220
- Honda 135-225HP - Use Hub Kit #835278Q1
- Suzuki 150-300HP - Use Hub Kit #835281Q1
- Yamaha 150-300 HP including SHO (2015 and newer) - Use Hub Kit #835274Q1
- Yamaha 200-250 HP SHO (2014 and older) - Use Hub Kit #8M0075402