Shop OutBoard & SternDrive
Propellers
View Propellers
Shop ACME and OJ Propellers
Ski/Wake
View Propellers
Shop Cruiser
Propellers
View Propellers
Shop POD Drive Volvo Penta/Mercury Zeus
View Propellers
Shop Propeller Repair
Get Started
Aluminum
Props
View Propellers
Demo & Used
Propellers
View Propellers
Marine Accessories & Prop Pullers
View Accessories
The Mercury Bravo 1 is a 4-blade stainless steel propeller for high-performance, high drive height, outboard and sterndrive applications. The Bravo 1 provides excellent speed and handling, paired with a quick planing and smooth handling. Works well on several applications including; bass, multispecies, bay boats, and center consoles. Great for stepped hulls and cats!
For V-bottom and cat owners looking to achieve maximum top speed, the Bravo I® Lab Finish allows for an increase of 2 inches of pitch, which equates to a 2 to 3 mph gain at WOT. Top-end rpm will increase by about 300, and it will spool up quicker than a standard finish Bravo I®. With the same barrel length as the Bravo LT, the Bravo I® Lab Finish propeller is designed for four-stroke outboards and sterndrive applications that will benefit from thinner blades.
- Hub kit sold separately, see the fitment section below to find the correct hub kit for your application.
- Mercury Bravo I Lab finished propellers will run faster RPMs than the a standard Bravo I propeller of the equivalent pitch.
- Mercury Racing® propeller artisans hand blend the robust blades for peak performance in both outboard and sterndrive applications.
- Enabled with Performance Vent system (PVS) to allow optimal hole-shot customization
Lab Finishing Four Step Process
- Blade surfaces are thinned in specific areas
- Modify leading edge
- Tune trailing cup heights
- Zero Balanced for maximum efficiency
- 90-115HP Command Thrust (CT), 2014-Newer
- Note: This will only fit the 90-115 Command Thrust gearcase, it will not fit a standard 90-115 gearcase
- Use Hub Kit 8M0150151
- 135-400HP Outboards, 1978-Newer
- Use Hub Kit 835257K6 for all 2-Stroke outboards with 1.0" prop shaft
- Use Hub Kit 8M0150151 for 135-225HP 4-Stroke outboards with 1.0" prop shaft
- Use Hub Kit 8M0101602 for 225+HP 4-Stroke outboards with 1.0" prop shaft
- Use Hub Kit 8M0101601 for all 1.25" prop shaft applications (V8 Four stroke & 350-450 Verado)
- Evinrude/Johnson/OMC (1991 and newer) - Use Hub Kit 8M0119081
- Evinrude/Johnson/OMC (1990 and older) - Use Hub Kit 8M0119082
- Evinrude E-TEC G2 (2015 and newer) - Use Hub Kit 8M0107220
- Honda 135-225HP - Use Hub Kit 835278Q1
- Suzuki 150-300HP - Use Hub Kit 835281Q1
- Yamaha 150-300 HP including SHO (2015 and newer) - Use Hub Kit 835274Q1
- Yamaha 200-250 HP SHO (2014 and older) - Use Hub Kit 835274Q1
Mercury 90-115HP Command Thrust Outboards
Mercury 135-400HP Outboards
Non-Mercury Outboards (4.75" Gearcase)
Shop Mercury Bravo I Lab Finished propellers at Prop Depot and get expert assistance selecting the right propeller for your boat, engine, and performance needs. Contact our team for help with propeller sizing, pitch selection, and application compatibility.
Tennessee Propeller & Metalworks
Phone: 865-673-8171
Email: [email protected]
Mercury Marine Warranty: Warranty coverage varies by product. Please verify the applicable warranty terms for your specific propeller before purchasing.
