MERCURY BRAVO I XC PRO FINISHED 15.3 X 19 RH PROPELLER 8M0118468

MERCURY BRAVO I XC PRO FINISHED 15.3 X 19 RH PROPELLER 48-8M0118468

The Mercury Racing Pro Finished Bravo I XC Propeller, designed specifically for single outboard powered hulls, features a tremendous amount of blade cup. Ideal for shallow water running Flats Boats. The enhanced cup enables the engine to be run at elevated transom heights – without sacrificing performance. The larger blade area enables the prop to stay hooked up for quick planing and enhanced performance throughout the engine rpm range. The exhaust tube is designed to support planing and stability at lower speeds. The Bravo I XC outperformed many four blade offerings with shorter time to plane, improved grip at lower speeds and quicker throttle response.

• Hub kit sold separately, see the fitment section below to find the correct hub kit for your application.
• Enabled with 4-hole Performance Vent System (PVS) to allow optimal hole-shot customization.
• According to the Mercury propeller guide handbook the added cup reduces rpm, plan to drop 2" of pitch compared to standard Bravo I. Also, if running a jack plate consider increased engine height.

Mercury 90-115HP Command Thrust Outboards

• 90-115HP Command Thrust (CT), 2014-Newer
• Note: This will only fit the 90-115 Command Thrust gearcase, it will not fit a standard 90-115 gearcase
• Use Hub Kit #8M0150151

Mercury 135-400HP Outboards

• 135-400HP Outboards, 1978-Newer
• Use Hub Kit #835257K6 for all 2-Stroke outboards
• Use Hub Kit #8M0150151 for 135-225HP 4-Stroke outboards with 1.0" prop shaft
• Use Hub Kit #8M0101602 for 225+HP 4-Stroke outboards with 1.0" prop shaft
• Use Hub Kit #8M0101601 for all 1.25" prop shaft applications (V8 Fourstroke & 350-450 Verado)

Mercury MerCruiser Alpha & Bravo One

• For all engines with an Alpha or Bravo One drive
• Use Hub Kit #835257K6 for all applications less that 300HP
• Use Hub kit #835258K2 for all application over 300HP with 1.0" prop shaft
• Use Hub Kit #840389K06 for all 1.25" prop shaft applications

Non-Mercury Outboards (4.75" Gearcase)

• Evinrude/Johnson/OMC (1991 and newer) - Use Hub Kit #8M0119081
• Evinrude/Johnson/OMC (1990 and older) - Use Hub Kit #8M0119082
• Evinrude E-TEC G2 (2015 and newer) - Use Hub Kit #8M0107220
• Honda 135-225HP - Use Hub Kit #835278Q1
• Suzuki 150-300HP - Use Hub Kit #835281Q1
• Yamaha 150-300 HP including SHO (2015 and newer) - Use Hub Kit #835274Q1
• Yamaha 200-250 HP SHO (2014 and older) - Use Hub Kit #8M0075402