Shop OutBoard & SternDrive
Propellers
View Propellers
Shop ACME and OJ Propellers
Ski/Wake
View Propellers
Shop Cruiser
Propellers
View Propellers
Shop POD Drive Volvo Penta/Mercury Zeus
View Propellers
Shop Propeller Repair
Get Started
Aluminum
Props
View Propellers
Demo & Used
Propellers
View Propellers
Marine Accessories & Prop Pullers
View Accessories
Mercury Enertia 11 Pitch LH Propeller – 16 x 11 – 8M0151224
The Mercury Enertia 11 pitch LH propeller 8M0151224 combines a 16-inch diameter with three blades made from Mercury X7 stainless steel alloy. Designed for acceleration, speed and handling on compatible runabouts, pontoons and center consoles, this left-hand boat propeller features Mercury’s Performance Vent System (PVS) for adjustable hole-shot tuning.
Propeller Specifications
- Brand: Mercury Marine
- Model: Enertia
- Part number: 8M0151224
- Alternate part-number format: 48-8M0151224
- Diameter: 16 inches
- Pitch: 11 inches
- Rotation: Left-hand (LH / counter-rotation)
- Blades: 3
- Material: Mercury X7 stainless steel alloy
- Venting: Mercury Performance Vent System (PVS)
- Factory PVS plugs: Solid plugs installed (Mercury catalog specification)
- Hub kit: Required and sold separately
Acceleration and Handling
The Enertia’s X7 alloy supports blade designs that help deliver responsive acceleration and top-end performance. Holding power in turns supports control during everyday cruising and tow-sports use. Results depend on the boat, engine, load and propeller setup.
Adjustable Hole-Shot Performance
Mercury’s PVS uses interchangeable vent plugs to adjust exhaust ventilation during acceleration. Select the vent configuration for your engine, boat and typical load.
Application and Pitch Selection
Mercury lists the Enertia family for select Mercury and Mariner 90–115 HP Command Thrust outboards, Mercury 135–350 HP two-stroke and four-stroke outboards excluding V10 Verado, and MerCruiser Alpha One and Bravo One sterndrives with the correct hub hardware. Family-level compatibility does not establish whether this particular diameter and pitch suit your boat.
This model requires left-hand (LH) rotation. Confirm rotation for each engine in a multi-engine installation. Choose 11 pitch using your current propeller, normal load and measured wide-open-throttle RPM so the engine operates within its manufacturer’s recommended range.
Choose the Correct Hub Kit — Sold Separately
Select your engine group below, then confirm the engine model, gearcase and propeller-shaft size. These are hub-selection guidelines, not confirmation that every engine listed is suitable for this propeller. Confirm propeller clearance, required rotation, pitch and the engine manufacturer’s recommended operating RPM before ordering.
Mercury 90–115 HP Command Thrust Outboards
- For compatible 90–115 HP Command Thrust models, 2014 and newer, with a 1-inch propeller shaft, select Flo-Torq SSR Hub Kit 8M0150151.
- The Command Thrust propeller application does not apply to standard-gearcase 90–115 HP models. Confirm the gearcase before ordering.
Mercury / Mariner Performance Outboards
- Compatible Mercury / Mariner applications requiring standard Flo-Torq II hardware: Flo-Torq II Hub Kit 835257K1. Confirm the exact engine, shaft and propeller application before ordering.
- Compatible current-generation FourStroke outboards through 225 HP with a 1-inch shaft: Flo-Torq SSR Hub Kit 8M0150151.
- Compatible FourStroke outboards through 350 HP with a 1-inch shaft, including high-performance or surface-piercing use: Flo-Torq SSR Solid Hub Kit 8M0101602.
For engines within overlapping horsepower ranges, select the hub according to engine model, generation, shaft size and operating conditions. The SSR kit listed here is not a universal fit for legacy FourStroke engines or two-stroke outboards.
Mercury Outboards with a 1.25-Inch Propeller Shaft
- Flo-Torq SSR HD Hub Kit 8M0101601 is specified for applications including 225–250 HP Pro XS with TorqueMaster II, 300/350 HP Verado with the 5.44-inch HD gearcase, and Verado 400R.
- Excludes V10 Verado models. Contact us to confirm other 1.25-inch-shaft applications.
Evinrude / Johnson Outboards
- V6/V8 gearcase, 1991 and newer, excluding E-TEC G2: Hub Kit 8M0119081.
- V6/V8 gearcase, 1984–1990: Hub Kit 8M0119082.
- E-TEC G2, 2014 and newer: Hub Kit 8M0107220.
Honda Outboards
- Compatible 135–225 HP four-stroke models: Hub Kit 835278Q1.
- Contact us to confirm applications outside this range.
Suzuki Outboards
- Compatible 150–300 HP four-stroke or 150–225 HP two-stroke models: Hub Kit 835281Q1.
Yamaha Outboards
- 150–300 HP four-stroke and 115–250 HP V MAX SHO models using a single-piece factory thrust washer: Hub Kit 835274Q1.
- 115–250 HP V MAX SHO models using a two-piece factory thrust washer: Hub Kit 8M0075402.
For Yamaha SHO engines, confirm the factory thrust-washer configuration rather than selecting by model year alone.
MerCruiser Alpha One and Bravo One Sterndrives
- Compatible standard 1-inch-shaft applications below 400 HP: Flo-Torq II Hub Kit 835257K1. Confirm propeller clearance and operating conditions before selecting this kit.
- Compatible Bravo One performance applications with a 1-inch shaft: Flo-Torq SSR Solid Hub Kit 8M0101602. Confirm the complete propeller and hub combination for your drive.
- Do not select an SSR kit for an Alpha One drive. For engines at 400 HP and above, 1.25-inch shafts or XR/XZ drives, contact us to select the application-specific solid or heavy-duty hub and installation hardware.
Have a Damaged Enertia? Keep It as a Spare
Purchasing a new Enertia? Your damaged propeller may still be repairable and useful as a backup. Prop Depot / Tennessee Propeller & Metalworks offers three-blade stainless steel propeller repair to help you prepare a spare for unexpected damage during boating season.
Contact our team to discuss your propeller’s condition and repair options. Repairability depends on the extent of the damage.
Explore 3-Blade Stainless Steel Propeller Repair Services
Confirm Propeller Fitment
Need help choosing a 11 pitch left-hand Mercury Enertia? Have your boat model, engine or drive model, serial number, horsepower, shaft and gearcase details, required rotation, current propeller size, typical load and wide-open-throttle RPM available when you contact us.
Why Buy from Prop Depot?
Prop Depot / Tennessee Propeller & Metalworks offers propeller sales, repair experience and personal assistance with pitch, rotation and hub-kit selection. Our Knoxville team can help you evaluate the right setup for your boat and performance goals.
Manufacturer information: Mercury Enertia.
Warranty: Warranty coverage varies by product. Contact us to verify the applicable terms for this propeller before purchasing.
Prop Depot / Tennessee Propeller & Metalworks
1404 Galway Street, Knoxville, TN 37917
Phone: (865) 673-8171
Website: PropDepot.com






