Shop OutBoard & SternDrive
Propellers
View Propellers
Shop ACME and OJ Propellers
Ski/Wake
View Propellers
Shop Cruiser
Propellers
View Propellers
Shop POD Drive Volvo Penta/Mercury Zeus
View Propellers
Shop Propeller Repair
Get Started
Aluminum
Props
View Propellers
Demo & Used
Propellers
View Propellers
Marine Accessories & Prop Pullers
View Accessories
Mercury Fury 4 25 Pitch RH Propeller – 14.5 x 25 – 8M0238906
The Mercury Fury 4 25 pitch RH propeller 8M0238906 combines a 14.5-inch diameter with a four-blade design made from Mercury X7 stainless steel alloy. Designed for compatible tournament bass boats carrying heavier loads, this right-hand propeller emphasizes lift, holding power and midrange acceleration.
Propeller Specifications
- Brand: Mercury Marine
- Model: Fury 4
- Part number: 8M0238906
- Alternate part-number format: 48-8M0238906
- Diameter: 14.5 inches
- Pitch: 25 inches
- Rotation: Right-hand (RH)
- Blades: 4
- Material: Mercury X7 stainless steel alloy
- Venting: Eight-hole Mercury Performance Vent System (PVS)
- Hub kit: Required and sold separately
Updated Fury 4 Design
This current Fury 4 model features Mercury’s revised blade design and casting improvements for increased durability.
Performance with Heavy Tournament Loads
The Fury 4’s additional blade area helps carry boats loaded with fuel, batteries, tackle and livewell water. Its design supports strong midrange acceleration and holding in rough water. On suitable heavily loaded boats, it can outperform the three-blade Fury; actual results depend on the boat, engine and setup.
X7 Alloy and Adjustable PVS Venting
Mercury’s X7 stainless steel alloy supports advanced blade designs with strength and durability. The Fury 4 has eight PVS vent holes, two per blade. Interchangeable PVS plugs allow you to adjust exhaust ventilation during acceleration to suit your boat, engine and normal load.
Application and Pitch Selection
Mercury lists Fury 4 applications for select Mercury and Mariner 135–350 HP two-stroke and four-stroke outboards, 1978 and newer, excluding V10 models, and 90–115 HP Command Thrust outboards. Confirm the exact engine, gearcase, propeller shaft and clearance before ordering.
This model requires right-hand rotation. Select 25 pitch based on your current propeller, normal operating load and measured wide-open-throttle RPM. Keep the engine within its manufacturer’s recommended operating range; do not assume the same pitch produces identical RPM across different propeller designs.
Earlier Fury 4 Part Numbers
Earlier 25-pitch, right-hand Fury 4 part numbers include 48-8M0114409 and 48-8M0151280. Match pitch, rotation and required hub hardware when replacing an older propeller. Contact us to confirm the replacement application for part 8M0238906.
Choose the Correct Hub Kit — Sold Separately
Mercury recommends these hub kits for Fury 4:
- Compatible 1-inch propeller shafts: Flo-Torq SSR Solid Hub Kit 8M0101602.
- Compatible 1.25-inch propeller shafts: Flo-Torq SSR HD Hub Kit 8M0101601.
Confirm the engine model, serial number, gearcase and shaft size in your engine manual before ordering. The hub must suit the engine as well as the propeller; a matching shaft size alone does not establish fitment. For two-stroke, legacy or unusual applications, contact us to confirm the required hardware.
Mercury 90–115 HP Command Thrust Outboards
For a confirmed Fury application on a 90–115 HP Command Thrust outboard, 2014 and newer, with a 1-inch propeller shaft, review the SSR Solid 8M0101602 recommendation above. This gearcase application does not apply to standard-gearcase 90–115 HP models. Confirm that the selected pitch suits the boat and operating RPM.
Other Mercury / Mariner Hub Applications
- Applications specifying Flo-Torq II with a bushing: Hub Kit 835257K6 is used with compatible high-performance and surface-piercing propeller setups. Confirm its use for your engine before ordering.
- General-purpose SSR option: Hub Kit 8M0150151 is listed for compatible current-generation FourStroke engines through 225 HP with a 1-inch shaft. Ask us before substituting it for the propeller-specific SSR Solid recommendation. It is not a universal option for two-stroke or legacy FourStroke engines.
Mercury Outboards with a 1.25-Inch Propeller Shaft
SSR HD Hub Kit 8M0101601 is listed for applications including 225–250 HP Pro XS with TorqueMaster II, 300/350 HP Verado with the 5.44-inch HD gearcase, and Verado 400R. It excludes V10 Verado models. These are hub-kit applications; confirm that the complete propeller and engine combination is suitable.
Other engine brands: the links below identify hub options for the stated engine groups. Confirm complete propeller fitment before selecting one for a Fury or Fury 4.
Evinrude / Johnson Outboards
- V6/V8 gearcase, 1991 and newer, excluding E-TEC G2: Hub Kit 8M0119081.
- V6/V8 gearcase, 1984–1990: Hub Kit 8M0119082.
- E-TEC G2, 2014 and newer: Hub Kit 8M0107220.
Honda Outboards
- Compatible 135–225 HP four-stroke models: Hub Kit 835278Q1.
- Contact us to confirm applications outside this range.
Suzuki Outboards
- Compatible 150–300 HP four-stroke or 150–225 HP two-stroke models: Hub Kit 835281Q1.
Yamaha Outboards
- 150–300 HP four-stroke and 115–250 HP V MAX SHO models using a single-piece factory thrust washer: Hub Kit 835274Q1.
- 115–250 HP V MAX SHO models using a two-piece factory thrust washer: Hub Kit 8M0075402.
For Yamaha SHO engines, confirm the factory thrust-washer configuration rather than selecting by model year alone.
Have a Damaged Fury 4? Keep It as a Spare
Purchasing a new Mercury Fury 4? Your damaged propeller may still be repairable and useful as a backup. Prop Depot / Tennessee Propeller & Metalworks offers four-blade stainless steel propeller repair to help you prepare a spare for unexpected damage during boating season.
Contact our team to discuss your propeller’s condition and repair options. Repairability depends on the extent of the damage.
Explore 4-Blade Stainless Steel Propeller Repair Services
Confirm Propeller Fitment
Need help selecting a 25 pitch right-hand Mercury Fury 4? Have your boat model, engine model and serial number, horsepower, gearcase and shaft details, current propeller size, typical load and wide-open-throttle RPM available when you contact us.
Why Buy from Prop Depot?
Prop Depot / Tennessee Propeller & Metalworks combines propeller sales and repair experience with personal assistance on pitch, rotation and hub-kit selection. Our Knoxville team can help you evaluate a setup for your boat and performance goals.
Manufacturer information: Mercury Fury 4.
Mercury Marine Warranty: Warranty coverage varies by product. Please verify the applicable warranty terms for your specific propeller before purchasing.
Prop Depot / Tennessee Propeller & Metalworks
1404 Galway Street, Knoxville, TN 37917
Phone: (865) 673-8171
Website: PropDepot.com






