Welcome To Google's Most Reviewed Prop Shop!

Google Shopping Exceptional Rating

Shop OutBoard & SternDrive
Propellers

View Propellers

Shop ACME and OJ Propellers
Ski/Wake

View Propellers

Shop Cruiser
Propellers

View Propellers

Shop POD Drive Volvo Penta/Mercury Zeus

View Propellers

Shop Propeller Repair

Get Started

Aluminum
Props

View Propellers

Demo & Used
Propellers

View Propellers

Marine Accessories & Prop Pullers

View Accessories

Mercury Trophy Plus 26 Pitch RH Stainless Steel Propeller – 13.75 x 26 – 8M0151395

SKU 8M0151395
$840.99
FREE SHIPPING OVER $249.99
was $1,005.66 Save $164.67
26 pitch • RH • 4-blade stainless steel • PVS • Hub sold separately
In stock
1
Customer reviews
Reviews only from verified customers
No reviews yet. You can buy this product and be the first to leave a review.
Mercury Trophy Plus 26 Pitch RH Stainless Steel Propeller – 13.75 x 26 – 8M0151395
Product Details
MPN: 8M0151395
Brand: Mercury

The Mercury Trophy Plus 26 pitch RH propeller 8M0151395 is a 13.75 x 26, right-hand, four-blade stainless steel propeller for compatible bass boats, flats boats and lightweight fishing boats. Its blade geometry supports acceleration, bow lift and control through turns. Select the pitch and hub for your engine, normal load and operating RPM.

Propeller Specifications

  • Brand: Mercury Marine
  • Model: Trophy Plus
  • Part number: 8M0151395
  • Full part-number format: 48-8M0151395
  • Diameter: 13.75 inches (13-3/4 inches; rounded to 13.8 in Mercury application charts)
  • Pitch: 26 inches
  • Blades: 4
  • Rotation: Right-hand (RH); clockwise viewed from behind the boat in forward gear
  • Material: Stainless steel
  • Venting: Mercury Performance Vent System (PVS)
  • Factory PVS plugs: Large-hole, as specified in Mercury's propeller guide
  • Propeller hub diameter: 4.25 inches
  • Hub kit: Not included; sold separately

Performance and Applications

The Trophy Plus is designed to help lightweight fishing boats accelerate onto plane and maintain control through turns. Its blade geometry supports bow lift and handling on suitable setups running the outboard higher. Performance depends on the boat, engine, load, and installation.

Adjustable Hole-Shot Performance

Mercury's PVS lets you change vent plugs to tune exhaust flow around the blades during acceleration. Match the venting to your engine and typical load when setting up your 26-pitch Trophy Plus.

Engine and Gearcase Fitment

Mercury lists Trophy Plus applications for select Mercury and Mariner Command Thrust outboards from 40 HP and compatible 75–225 HP outboards, excluding V8 models. The design is particularly suited to 75–225 HP two-stroke applications. Engine model, gearcase, propeller shaft, and hub kit must all be checked before ordering.

This 26-pitch model is a higher-pitch option within the Trophy Plus range. Confirm that your engine can reach its recommended wide-open-throttle RPM range with your normal passenger and gear load before choosing this pitch.

Choosing the Correct Pitch

This listing is specifically for 26 pitch and right-hand rotation. Choose a propeller that lets the engine operate within its manufacturer’s recommended wide-open-throttle RPM range with your normal load. The same pitch in a different propeller design may perform differently; confirm your current propeller, RPM and performance goals before changing models.

Choose the Correct Hub System

Select your engine group below, then confirm the exact model, serial number, gearcase and propeller-shaft size. These are engine-specific hub references, not blanket approval of every Trophy Plus pitch on every listed engine. Mercury recommends Trophy Plus for approved applications through 225 HP, excluding V8 models. A hub kit's broader rating does not extend this propeller's application range.

Mercury / Mariner 40–60 HP BigFoot / Command Thrust

  • Conventional, non-surfacing installations approved for Flo-Torq II: Hub Kit 835257K1. Confirm the engine and required hardware; surfacing applications may require a different kit.
  • Compatible FourStroke engines with the larger 4.25-inch gearcase and 1-inch shaft: Flo-Torq SSR Hub Kit 8M0150151.
  • This application does not include standard-gearcase 40–60 HP engines. Confirm that your engine can run the selected pitch within its recommended RPM range.

Mercury / Mariner 75–225 HP and 90–115 HP Command Thrust

  • Conventional, non-surfacing installations approved for Flo-Torq II: Hub Kit 835257K1. Confirm the engine and required hardware; surfacing applications may require a different kit.
  • Compatible FourStroke installations with a 1-inch shaft: Flo-Torq SSR Hub Kit 8M0150151.
  • Approved high-performance and surface-piercing installations requiring Flo-Torq II: Hub Kit 835257K6 with bushing.
  • Compatible FourStroke high-performance or surface-piercing installations requiring a solid 1-inch hub: Flo-Torq SSR Solid Hub Kit 8M0101602.
  • The 75–115 HP standard gearcase and 90–115 HP Command Thrust gearcase are different applications. Mercury identifies the 17- and 19-pitch Trophy Plus for 75–115 HP engines; confirm gearcase, pitch and required hardware.
  • For a 1.25-inch shaft, contact Prop Depot before ordering; the 1-inch kits above do not fit. Excludes V8 engines.

Use the SSR kits above only for approved FourStroke installations. For two-stroke engines, choose the specified Flo-Torq II kit and confirm whether the installation requires the supporting bushing. Contact us for legacy engines or a 1.25-inch propeller shaft.

Seal Ring for Approved 4.75-Inch Gearcases

Trophy Plus has a 4.25-inch exhaust hub. Mercury specifies seal ring 878421 when exhaust venting around that hub is excessive on an approved 4.75-inch gearcase. Confirm the installation before adding the ring.

Evinrude / Johnson Outboards

Honda Outboards

  • Compatible 4.25-inch gearcase, 75–90 HP through 1998: Hub Kit 835277Q1.
  • Compatible 4.25-inch gearcase, 75–90 HP from 1999 onward and 115–130 HP: Hub Kit 835279Q2.
  • Compatible 135–225 HP four-stroke models with the specified large gearcase: Hub Kit 835278Q1.
  • Contact us to confirm applications outside this range.

Suzuki / Johnson Four-Stroke and Suzuki Outboards

  • Compatible 4.25-inch gearcase, Suzuki/Johnson 90–115 HP four-stroke, 2001–2008: Hub Kit 835283Q1.
  • Compatible 4.25-inch gearcase, Suzuki/Johnson 100–115 HP four-stroke from 2009 onward and 140 HP four-stroke: Hub Kit 835283Q2.
  • Compatible Suzuki 70–90 HP four-stroke from 2009 onward: Hub Kit 835283Q03.
  • Compatible 150–225 HP four-stroke or two-stroke models within the Trophy Plus application limit: Hub Kit 835281Q1.

Yamaha Outboards

  • Compatible 4.25-inch gearcase, 50–100 HP using the specified splined thrust washer: Hub Kit 835272Q1.
  • Compatible 115–130 HP and approved 150–225 HP two-stroke/HPDI installations: Hub Kit 835271Q2.
  • Compatible 150–225 HP four-stroke models, including approved SHO installations using a single-piece factory thrust washer: Hub Kit 835274Q1.
  • Compatible 200–225 HP V MAX SHO four-stroke installations using a two-piece factory thrust washer: Hub Kit 8M0075402.

For Yamaha SHO engines, confirm the factory thrust-washer configuration rather than selecting by model year alone.

For non-Mercury engines, confirm Trophy Plus suitability, pitch, barrel clearance, thrust hardware and any seal requirements with Prop Depot before ordering. Hub compatibility alone does not establish complete propeller fitment.

Have a Damaged Trophy Plus? Keep It as a Spare

Purchasing a new Mercury Trophy Plus? Your damaged propeller may still be repairable and useful as a backup. Prop Depot / Tennessee Propeller & Metalworks offers four-blade stainless steel propeller repair to help you prepare a spare for unexpected damage during boating season.

Contact our team to discuss your propeller’s condition and repair options. Repairability depends on the extent of the damage.

Explore 4-Blade Stainless Steel Propeller Repair Services

Confirm Propeller Fitment

For help selecting this 26 pitch Mercury Trophy Plus, contact us with your boat model, engine model and serial number, horsepower, gearcase, current propeller part number and pitch, and wide-open-throttle RPM with your normal load. Prop Depot can help confirm the propeller, hub kit and installation hardware.

Why Buy from Prop Depot?

Prop Depot / Tennessee Propeller & Metalworks combines propeller sales and repair experience with personal assistance on pitch, rotation and hub-kit selection. Our Knoxville team can help you evaluate a propeller for your boat and performance goals.

Manufacturer information: Mercury Marine Trophy Plus.

Availability: Contact us to confirm stock and dispatch timing for this exact part number.

Mercury Marine Warranty: Please confirm the applicable warranty terms for your propeller before purchasing.

Prop Depot / Tennessee Propeller & Metalworks
1404 Galway Street, Knoxville, TN 37917
Phone: (865) 673-8171
Email: [email protected]
Website: PropDepot.com

Find the right propeller for your boat!